Setting Up The Elsa-M Web Portal; Elsa-M Start-Up Tasks - Advantech LEO-D Series Installation And User Manual

Setting Up the ELSA-M Web Portal

4
Ensure that your ELSA-M Access Point is connected to your computer that the Router(s) and
tags are installed throughout your premises and are powered on.
NOTE: All tags must be "awake" prior to starting the ELSA-M web portal for the first time.

4.1 ELSA-M Start-Up Tasks

On your desktop double-click on the ELSA-M icon to launch the application service.
These next few tasks will only need to be performed the first time you access the ELSA-M Web
Portal and are required to enable system device deployment.
Please type in the name of your business, store, premises, etc and click OK to continue.
NOTE: Your computer has already been configured to work with the default setting for the
Access Point (see Computer Configuration for System Installation Section 2.7).
Type Yes and click OK to continue
Note: If your computer IP has not been changed to match the default requirements or if you
select No to the above then the installation will stop.
Before the Web Portal service begins you may receive a Windows Security Alert pop-up as
shown below
26
Confidential and Proprietary