Advantech LEO-D Series Installation And User Manual page 41

Sends a manual query ping to a selected hardware
device to check its status, the selected item will
temporarily appear 'Inactive' in the ESL Management
page and in the Device Status (main menu side bar).
If no issues are discovered then device will
automatically revert to 'Active' status, please refresh
your web page when the Device Status shows "Inactive
[0-0-0]"
Note: When using the web based application this
check runs automatically in the background on a daily
basis.
Will cause all selected devices (except the Access Point)
to restart, select the item(s) you want to update and
then click the Reboot icon.
If you change the battery or batteries in any of your
tags then you need to reboot the tag to clear the low
battery warning, tag will return to its original display
state.
Locate and click on the affected tag, then select the
Reboot icon.
Used for monitoring the battery status of the ESL tags,
a sliding control enables user to set alerts for any tags
that fall below the lower band. Tags that do fall below
the lower band will be highlighted on the ESL
Management page
Enables user to send an image (bmp, jpeg, gif) to a
selected ESL tag. Images will only display in the colors
supported by the tag i.e. grayscale/red-scale for
black/white/red tags.
Image size is limited by the resolution of the tag
(1.6inch 200x200, 2.2inch 212x104, 2.9inch 296x128,
4.2inch 400x300).
If tag was registered but did not have a product
associated with it; pushed images will continue being
displayed until the tag is either product associated or a
new image is pushed.
If tag was registered and associated with a product;
pushed image will overwrite the product information
on the tag, to revert to original database product
information use the Push function.
41
Confidential and Proprietary