On your computer open the Control Panel – Network and Internet – Network and Sharing
Center
Using your computer mouse, click on Ethernet
Select Properties
Select Internet Protocol Version 4 (TCP/IPv4), and select Properties
Check Use the following IP address and enter information shown above. Select OK to apply
new settings (All open windows can now be closed)
2.7.2 IP Address Configuration (Dynamic IP)
For installations that contain multiple Access Points an external TCP/IP Ethernet hub is required;
setting up the IP address for each Access Point will require modification of the ELSA-M Daemon
Integration file, please refer to UG-ELSA-M001: ELSA-M Daemon Integration Guide for further
details.
16
Confidential and Proprietary