Wiring Configuration Examples; Application Examples; Wiring Configuration For Automatic Motor Adaptation (Ama); Wiring Configuration For Automatic Motor Adaptation (Ama) Without T27 - Danfoss VLT HVAC Drive FC 102 Operating Manual
110-800 kw, d9h-d10h and e5h-e6h enclosed drives
Hide thumbs
Also See for VLT HVAC Drive FC 102:
- Programming manual (322 pages) ,
- Design manual (254 pages) ,
- Operating manual (200 pages)
Table of Contents
Advertisement
VLT® HVAC Drive FC 102
Operating Guide
8 Wiring Configuration Examples
8.1 Application Examples
The examples in this section are intended as a quick reference for common applications.
•
Parameter settings are the regional default values selected in parameter 0-03 Regional Settings, unless otherwise indicated.
•
Parameters associated with the terminals and their settings are shown next to the drawings.
•
Required switch settings for analog terminals A53 or A54 are also shown.
8.1.1 Wiring Configuration for Automatic Motor Adaptation (AMA)
Table 72: Wiring Configuration for AMA with T27 Connected
XD2.10
+24 V
XD2.11
+24 V
XD2.12
D IN
XD2.13
D IN
XD2.18
COM
D IN
XD2.14
D IN
XD2.15
D IN
XD2.16
D IN
XD2.17
D IN
XD2.19
8.1.2 Wiring Configuration for Automatic Motor Adaptation (AMA) without T27
Table 73: Wiring Configuration for AMA without T27 Connected
+24 V
XD2.10
+24 V
XD2.11
XD2.12
D IN
XD2.13
D IN
COM
XD2.18
D IN
XD2.14
D IN
XD2.15
D IN
XD2.16
D IN
XD2.17
D IN
XD2.19
+10 V
XD2.6
A IN
XD2.7
A IN
XD2.8
COM
XD2.9
A OUT
XD2.5
COM
XD2.4
118 | Danfoss A/S © 2021.11
Parameters
Function
Parameter 1-29 Automatic Motor Adaptation (AMA)
Parameter 5-12 Terminal 27 Digital Input
*=Default value
Notes/comments:
Set parameter group 1-2* Motor Data according to motor nameplate.
Terminal 27 in the parameter title corresponds to terminal XD2.14 in the control compartment.
Parameters
Function
Parameter 1-29 Automatic Motor Adaptation (AMA)
Parameter 5-12 Terminal 27 Digital Input
*=Default value
Notes/comments:
Set parameter group 1-2* Motor Data according to motor nameplate.
Terminal 27 in the parameter title corresponds to terminal XD2.14 in the control compartment.
Wiring Configuration Examples
Setting
[1] Enable complete AMA
[2]* Coast inverse
Setting
[1] Enable complete AMA
[0] No operation
AQ262141314214en-000301 / 130R0880
Advertisement
Table of Contents
Troubleshooting
