Ultimaker 2 User Manual page 10

To remove te cardboard piece underneath
10.
the buildplate gently lift up the buildplate
from the side Make sure you pule it up at the
thickest alumium plate this should go very
easy
Now you can take out the cardboard and
11.
gently push the buildplate back to the bottom
of the Ultimaker
Now carefully remove the cardboard pie-
12.
ce at the top back of the ultimaker
folded around the axis and the rubber belts
Do NOT use anything sharp to
Caution:
remove the cardboard this could damage the
rubber belts
Uncut remove the 2 plastic
13.
tiewraps that strap the XY axis and
sliderblock together in the corners of the
frame
Do NOT use anything sharp to
Caution:
remove the cardboard this could damage the
rubber belts
Now unwrap the glass from the plastic
14.
that you unboxed in an earlier stage
.
Get started unpack your Ultimaker
they are
10