D Make Your Irst D Print - Ultimaker 2 User Manual

Make your irst D print
D4.
It is important to tell your Ultimaker which
19/21.
type of material it will be using Ultimaker will ad
just its settings to match with speciic
materials ONTINUE
Now that the Ultimaker has leveled its build
20/21.
plate and has material ilament loaded it can now
begin to D print RE YOU RE DY
next step
IMPORTANT.
efore you continue onto the
next step make sure that you
add a thin layer of glue
middle of the glass print plate
Use the provided gluestick
that came with your
Ultimaker 2.
Make sure you have the SD card
21/21.
inserted that came with your Ultimaker
If not the SD card can be inserted at the front of the
Ultimaker on the right side of the
display in the SD card slot
to start D printing
[LET'S PRINT]
Your SD card comes with the ile
Ultimaker Robot click the button if you would like
to print this ile
D First use of your Ultimaker
to go to the next step
to go to the
on the
24