2
Cable Diagrams
<Cable Diagram 1>
Set Screws
! ! ! ! !
After all connector wires are attached to the connector, connect the connector to the
Device Net I/F Unit (5-wire type).
Important
Be sure to connect Terminating Resistors (121Ω1/4W) to both sides of the cable.
List Device Net Cables
There are two types of cable, thick and thin, for the Device Net unit.
Be sure to use only cables that meet the Device Net specifications. The following
two cables are recommended.
• Rockwell (Allen Bradley)
• Rockwell (Allen Bradley)
GP-PRO/PBIII for Windows Device/PLC Connection Manual
GP
PLC or PC (Terminal) or Tap
Wire Cover
Pin No.
Color
1
Black
2
Blue
3
None
4
White
5
Red
DeviceNet I/F unit attachment
screw connector
DeviceNet Cable
Thick type 1485C-PI-A***
Thin type 1485C-PI-C***
Device Net - Slave I/O
Comment
Power Supply (V-)
Communication Data
[Low side] (CAN_L)
Shield
Communication Data
[High side] (CAN_H)
Power Supply (V+)
3