Advertisement
The Initialize screen's SET UP I/O area's settings disabled.
Enter the following settings to begin I/O communication.
• In the DIO Start Address, enter a value from LS20-LS1999.
• In the Input Area Size, enter a value from 0-127 words.
• In the Output Area Size, enter a value from 0-127 words.
The GP's SYSTEM DATA AREA(LS0 to LS19) cannot be allocated.
< PLC Settings >
For PLC settings, refer to each company's Device Net communication unit's manual.
GP-PRO/PBIII for Windows Device/PLC Connection Manual
Set the word area size that is equal to the output area size of the DeviceNet master
unit.
Set a word area size equal to the input area size of the DeviceNet master unit.
Device Net - Slave I/O
Touch the PLC SETUP
selection. The SET UP
OPERATION SURROUNDINGS
menu will appear.
5
Advertisement
