Team Blacksheep TBS OBLIVION Manual page 22

Disconnect the bullet connectors and make a note of which order the lead exits the motor casing, this
makes it easier to get the spinning direction right at first try.
If the motor is spinning the wrong direction, swap either two of the bullet connects to change the
direction.
The maximum motor size that fits within the protective bounds of the frame is Ø28.4mm. Motor mounting
holes are compatible with Cobra style or open bottoms. Only two screw holes can be used for 16x16mm or
19x19mm mounting pattern motors. 230x-class motors may fit, but just barely. Sanding may be required.
We have verified that Steele V2 motors fit, MasterPilots motors need sanding.
22