Adjusting Camera Tilt Angle - Team Blacksheep TBS OBLIVION Manual

Follow the instructions on the screen and
move your sticks accordingly. If the direction
does not match, it needs to be adjusted in
your R/C radio configuration. BetaFlight can
not interpret reversed channels.
Adjusting camera tilt angle
The angle of the FPV pilot camera can be adjusted to provide a better view depending on your flying style.
A 15 tilt is recommended for beginner flyers and higher for fast forward flight and more advanced pilots
°
to compensate for the crazier speeds. An additional camera backplate is included for steeper camera tilt
angles. The higher the tilt, the faster the drone at level camera angle flying forward.
Use a hex screwdriver to loosen the screw from the underside of the frame. Adjust the angle to the desired
position and re-tighten the screw. Be careful not to over-tighten as it may crack the camera fastener.
Calibrating flight modes is not required. You
can ROLL RIGHT to skip, or assign a free 3-pos
switch in your R/C to take advantage of this
feature. Keep in mind that the default flight
mode for BetaFlight is ACRO/AIRMODE.
11