Putting On Propellers - Team Blacksheep TBS OBLIVION Manual

Putting on propellers
The provided propellers has two rotational profiles, counter-clockwise and clockwise. Getting these right is
important for a safe and proper first flight. The kit comes with two sets of three-blade 5x4.5-inch props.
Separate the propellers into two bulks, with the characters on the blades facing up; counter-clockwise and
clockwise.
Use the picture above to install the propellers on the motor shafts and use the provided M5 locking nuts to
securing them in place. An easy way to remember the rotation is that the leading-edge/tip of the two front
propellers always face each other and likewise on the tip of the two rear propellers.
Use the provided mounting kit to make it super easy to hold the motor while fastening the lock-nut screw.
Do not over-tighten the propellers as it may break the prop tool.
12