Main Brakes (Fig.7.3); Performance Brake Lever (Fig.7.4) - Sunrise Medical Quickie Attitude Power Directions For Use Manual

Fig.7.1
Fig.7.2

Main brakes (Fig.7.3):

The brakes allow you to safely and comfortably brake
your add-on bike.
WARNING!
• If the main brakes should fail, then the parking brakes
may be used once for emergency braking.
• The main brakes must be repaired imediately before
next use.
• Hard and sudden application of the brakes may cause
you to fall forward with your upper body, resulting in
possible injury. Therefore always stabilise yourself by
holding onto the handles firmly with both hands.
• Braking power can be severley decrease by any or all
of the following:
1. Worn tyre tread.
2. Air pressure which is too low.
3. Soiled and wet tyres.
4. Worn brake pads.
• Ensure that the brake pads and brake discs do not
become contaminated with oil and/or grease. If this
happens the brake pads must be replaced. The brake
disc must be professionally degreased with a brake
cleaner.
• The disc brake is not self-adjusting and needs to be
re-adjusted when the brake pads wear.
• Be aware that the condition of the ground surface can
significantly affect braking efficiency.
Attitude Power Rev.2.0

Performance brake lever (Fig.7.4):

The Performance brake lever (optional) gives you the
A
possibility to adjust the lever-feel and the way that the
main brake is applied.
Turning the red adjusting screw (A) on the brake lever
clockwise results in a harder lever feel and a better,
linear, controllability of the brake-force.
Turning the red adjusting screw (A) on the brake lever
counter-clockwise will result in a softer lever-feel and
more progressive brake-force.
Fig.7.3
Fig.7.4
A
15