Package Contents - Wayne-Dalton 8100 Installation Instructions And Owner's Manual

Package contents

Door sections (as required)
(2) horizontal tracks Rh/Lh
U-bar's Top bracket assembly
(as required) (as required)
Weather seal & nails Left and right bottom
(if included) brackets
(1) Center bracket Left and right end
bearing brackets
(2) Step plates #6 Screw eye and
pull rope
(if included)
Pushnuts (2) Clevis pin
(as required)
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
NoTe: DEPENDING ON ThE DOOR MODEL, SOME PARTS LISTED WILL NOT bE SUPPLIED If NOT
NECESSARY. REAR SUPPORTS MAY OR MAY NOT bE INCLUDED WITh YOUR DOOR.
(1) Torsion tube
Right and left
counterbalance cables
Extension brackets
(as required)
Left and right cable
drums (as required)
(2) Lift handles &
spacers
(2) Roller Spacers
(2) Cotter pin
Long and short shaft rollers
(As required)
Right and left torsion
springs (as required)
1
#1, #2, #3, #4, #5,
#6 & #7 hinges
(as required)
(2) flat Washer
(2) Rh/Lh Vertical track
assemblies
(1) Windload label
Top bracket base
(as required)
Top bracket slide
(as required)
3