Gun Placement; Install Gun; Position Gun - Graco LineLazer IV 250SPS Operation
Self-propelled line striper, for the application of line striping materials, for professional use only, for outdoor use only, not for use in hazardous locations or explosive atmospheres, maximum operating speed 10 mph 16 kph, maximum operating pressure: 3
Hide thumbs
Also See for LineLazer IV 250SPS:
- Manual (62 pages) ,
- Repair manual (54 pages) ,
- Installation and operation manual (33 pages)
Table of Contents
Advertisement
Gun Placement
Gun Placement
Install Gun
1. Insert gun into gun holder. Tighten clamp.
Position Gun
2. Position gun: up/down, forward/reverse, left/right.
See Gun Positions Chart, page 17 for examples.
12
ti6549a
3. Use the Gun Selector Switches to determine which
guns are active. Each gun selector switch has 3
positions: continuous line, OFF, and programmed
line pattern.
Programmed line pattern
OFF position disengages gun
Continuous line
ti18969a
ti18570a
2 Examples:
Gun 1
Gun 2
ti18551a
Gun 1
Gun 2
ti18572a
Use the Gun Trigger Control to actuate guns.
ti18574a
ti18575a
3A2090A Operation
Advertisement
Table of Contents
