Operation In Manual Mode; Operation In Automatic Mode - Graco LineLazer IV 250SPS Operation

Operation in Manual Mode

0DQXDO 0RGH
6(783
   
SVL
 ',67$1&( MRE
 *$//216 UHVHW !
 
-2% 0,/ µ /,1(
1. Make sure engine is running and main power switch
is on.
2. Use Gun Selector Switches to select guns and line
type.
ti18969a
3. Press and hold Gun Trigger Control button to spray
a line. Release button to stop spraying.
ti18564a
3A2090A Operation
02'(
ti9915b
ti18552a

Operation in Automatic Mode

Preset Skip Patterns
1. In the AUTOMATIC MODE, the striper is equipped
with Preset Skip Patterns. To select a preset skip
pattern, press MODE button to move to AUTO-
MATIC MODE.
0DQXDO 0RGH
6(783 02'(
   
SVL
 ',67$1&( MRE
 *$//216 UHVHW !
  -2% 0,/ µ /,1(
ti9915b
2. Press SETUP button to view preset skip patterns.
6(783
0($685( 02'(
!!  WR VWDUW 6(783

PHDVXULQJ




&/($5 $// !
ti9942b
3. Use SELECT arrows to mark desired pattern. Press
SETUP key to save and return to AUTOMATIC
MODE display.
4. Use Gun Selector Switches to select guns and line
type.
Programmed line pattern
OFF position disengages gun
Continuous line
ti18969a
NOTE: Striper must be moving for guns to activate.
5. With the striper moving faster than 0.3 mph (0.5
kph) press Gun Trigger Control Button to stripe.
Press button again to stop striping or reduce speed
to below 0.3 mph (0.5 kph).
ti18564a
Smart Control Operation
02'(
02'(
25