Serial Num Property - Magtek MICRSAFE Technical Reference Manual

MICRSafe with 3-Track MSR

SERIAL NUM PROPERTY

Property ID: 1
Property Type: String
Length: 0 – 15 bytes
Get Property: Yes
Set Property: Yes
Default Value: The default value is no string with a length of zero.
Description: The value is an ASCII string that represents the device's serial number. This
string can be 0 – 15 bytes long. The value of this property, if any, will be sent
to the host when the host requests the USB string descriptor.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
Example Set Serial Num property Request (Hex):
Cmd Num
01
Example Set Serial Num property Response (Hex):
Result Code
00
Example Get Serial Num property Request (Hex):
Cmd Num
00
Example Get Serial Num property Response (Hex):
Result Code
00
28
Data Len Prp ID
04 01
Data Len Data
00
Data Len Prp ID
01 01
Data Len Prp Value
03 32 32 38 32 37 30 32 31 41
30 31
Prp Value
32 32 38 32 37
30 32 31 41 30
31