Advertisement
TO TALK TO CUSTOMERS:
(not your fingernail), press and release either the A1 or the
A2 button according to the instructions below, and speak into the
microphone. When you have finished talking to the customer, press
the A1 or A2 button again. The headset will automatically stop
transmitting when the car drives away.
TO TALK TO OTHER CREW MEMBERS:
the B button near the microphone, shown in Figure 3, and speak into
the microphone. Release the button when you finish speaking.
Single-Lane Operation
(one base station for one speaker post)
Hands-Free (HF) Mode:
* Alert tone (single beep) sounds in headset, then customer
at speaker post or menu board can be heard.
* Adjust customer's voice level in headset if necessary.
* Press and release A1 or A2 button to speak and listen to
customer. You will see microphone boom tip light up.
* Press and release A1, A2 or B button to end communication
with customer. Microphone boom tip light will go out.
* Press and release A1 or A2 button if you want to speak to
the customer again. You will see microphone boom tip light
up.
* If customer drives away from speaker post or menu board,
headset automatically stops transmitting microphone boom tip
light will go out.
Auto Hands-Free (AHF) Mode:
* Alert tone (single beep) sounds in headset, then customer
at speaker post or menu board can be heard.
* Adjust customer's voice level in headset if necessary.
* Speak and listen to customer without pressing any buttons.
You will see microphone boom tip light up.
* Press and release A1, A2 or B button to end communication
with customer. Microphone boom tip light will go out.
* Press and release A1 or A2 button if you want to speak to
the customer again. You will see microphone boom tip light
up.
* If customer drives away from speaker post or menu board,
headset automatically stops transmitting. Microphone boom tip
light will go out.
Push-To-Talk (PTT) Mode:
* Alert tone (single beep) sounds in headset, then customer
at speaker post or menu board can be heard.
* Adjust customer's voice level in headset if necessary.
* Press and hold A1 or A2 button to speak to customer. You
will see microphone boom tip light up.
With your fingertip
Press and hold
(two base stations for two speaker posts)
Hands-Free (HF) Mode:
* Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu
board can be heard.
* Adjust customer's voice level in headset if necessary.
* Press and release A1 button for Lane 1 or A2 for Lane 2, to
speak and listen to customer. You will see microphone boom
tip light up.
* Press and release A1, A2 (depending on lane) or B button
to end communication with customer. Microphone boom tip
light will go out.
* Press and release A1 button for Lane 1 or A2 for Lane 2, to
speak to the customer again. You will see microphone boom
tip light up.
* To change lanes, press and release the opposite A button.
A voice in the headset will say "Lane 1" or "Lane 2."
* If customer drives away from speaker post or menu board,
headset automatically stops transmitting. Microphone boom tip
light will go out.
Auto Hands-Free (AHF) Mode:
* Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu
board can be heard.
* Adjust customer's voice level in headset if necessary.
* Speak and listen to customer without pressing any buttons.
You will see microphone boom tip light up.
* Press and release A1, A2 (depending on lane) or B button
to end communication with customer. Microphone boom tip
light will go out.
* Press and release A1 button for Lane 1 or A2 for Lane 2, to
speak to the customer again. You will see microphone boom
tip light up.
* If customer drives away from speaker post or menu board,
headset automatically stops transmitting. Microphone boom tip
light will go out.
Push-To-Talk (PTT) Mode:
* Alert tone (single beep for Lane 1, double beep for Lane 2)
sounds in headset, then customer at speaker post or menu
board can be heard.
* Adjust customer's voice level in headset if necessary.
* Press and hold A1 button to speak to customer in Lane 1;
A2 to speak to customer in Lane 2.
* To change lanes, press and release the opposite A button.
A voice in the headset will say "Lane 1" or "Lane 2."
Figure 3
Dual-Lane Operation
Advertisement
