Advertisement

HS25 (single ear) and HS25D (dual ear) headsets are designed for use with HME beltpacks with MD4
male connector.

Using your HS25 Headset

Adjusting the Headset:
You can position the microphone boom for either the right or the
left side of the head.
You can adjust the fit of the headset by using the slide adjusts on
either side of the headband.
Microphone Boom operation:
Turn the headset microphone ON by pulling the boom gently
downward (down past the 10 O'clock / 2 O'clock angle).
Turn the headset microphone OFF by pushing the boom gently
upward (to above the 10 O'clock / 2 O'clock angle).
Headset and Beltpack Connection
HS25 and HS25D Headsets
USER GUIDE
HME# 400G755
Rev A
6/21/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS25 and is the answer not in the manual?

Questions and answers

Summary of Contents for HME HS25

  • Page 1 HS25 and HS25D Headsets USER GUIDE HS25 (single ear) and HS25D (dual ear) headsets are designed for use with HME beltpacks with MD4 male connector. Using your HS25 Headset Adjusting the Headset: You can position the microphone boom for either the right or the left side of the head.
  • Page 2 HME and the HME logo are trademarks or registered trademarks of HM Electronics, Inc. The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation /reverse engineering. No part of this document may be reproduced in any form by any means without prior written authorization of HME, an HME Company.

This manual is also suitable for:

Hs25d

Table of Contents