Advertisement
NOTE: Pressing A1, A2 or B while someone else is talking will not prevent their communications, however, they
will hear you as well as whomever they are talking to.
TO CHANGE BATTERIES:
weak, a voice in the earpiece will say "Change battery." When this
happens, remove the battery from the headset by carefully sliding
the battery-release button shown in Figure 4. Pull the end of the
battery near the battery-release button away from the headset and lift
the battery out.
TO REPLACE BATTERIES:
the headset, place the end of the battery with the metal contacts into
the battery holder on the headset, in the same position as the battery
you removed. Press the top of the battery carefully into the battery
holder until it snaps in place under the battery-release button.
MAKING HEAD SIZE ADJUSTMENTS:
Adjustments are made using the adjuster behind the battery holder as show in Figure 4a. The adjuster ratchets in
and out on a track to accommodate almost any head size.
NOTE: This headset will accept only batteries with a "red color" label. Other batteries will not fit this unit.
Battery
charging
When a battery is becoming
When replacing a battery in
Battery in
storage port
Figure 5.
Figure 4
You may adjust the head size of HS6000 for best fit.
Figure 4a
TO RECHARGE THE BATTERY:
battery in one of the four charging ports as shown in
Figure 5. When the battery is charging, the red
CHARGING light next to it will be on. When a battery is
fully charged, the green READY light next to it will be on.
Battery charging time is approximately 2 hours. When a
battery is fully charged, it can be stored in one of the six
storage ports on the battery charger.
Battery
Release
Place the
Advertisement
