11) Setting Swivel Stops; 12) Placing Door On The Work Top And Pushing Up Against The Stop Or Marking Line; 13) Setting Hold Down Clamps To The Material Thickness; 14) Attaching Insertion Ram To Swing Arm - BLUM MINIPRESS P Manual

L
1.2
3.18
3.17
3.19
3.8
3.20
3 - Assembly

3.1.11) Setting swivel stops

Set the swivel stops
1.7
IMPORTANT:
!
Indicator edge is on the inside of the swivel part.
3.1.12) Placing door on the work top and pushing up against the stop or marking
line
IMPORTANT:
!
The stop surface can be enlarged by swivelling the stop flap forward for
grooved work pieces and work pieces with radiuses (see picture).
3.1.13) Setting hold down clamps
• Open clamping knob (3.18).
• Set the hold down clamps
guard (3.19)
• Loosely tighten clamping knob (3.18).

3.1.14) Attaching insertion ram to swing arm

• Place insertion ram on to the two fixing screws
• Tighten the screws so that the insertion ram is secure.
(1.7)
(1.7) to the desired dimension and clamp.
(3.17)
(3.17) so that the distance between the door and the clamp
is a max. x = 3 mm.
16
to the material thickness
(3.8)
(3.20) on the swing arm
BA-101/3EN M53.XXXX
(3.8)