Assembly Machine Setup; Unpacking And Assembly; 1) Assembly Machine Space Requirement; 2) Unpacking Assembly Machine And Attaching To A Suitable Table - BLUM MINIPRESS P Manual

H
B
1.1
1.2

1 - Assembly machine setup

1.1 - Unpacking and assembly

1.1.1) Assembly machine space requirement

ATTENTION:
T
The centre of gravity for the assembly machine is in the back

1.1.2) Unpacking assembly machine and attaching to a suitable table

• Open box
• Use two people to lift the assembly machine onto the table
ATTENTION:
To lift assembly machine only use hitch and load pick up device!
ATTENTION:
The assembly machine weighs approx. 47 kg.
The table should have the proper dimensions
Recommended table height 80 - 90 cm
•
• Pre-drill holes and then attach assembly machine
• Do not setup or store assembly machine in a moist environment. The
space should be dry.
1.1.3) Attaching
• Attach the MZE.130M00 package as per
included MZE.1300 (BA-199) installation instructions
H= 771 mm
W= 684 mm
D= 690 mm
(1.2) base ruler
10
(1.1) using the screws.
BA-101/3EN M53.XXXX