Installation On Concrete; Installation On Wooden Floor; Figure 4-1 Concrete Mounting - Motorola MOTOwi4 25600 Hardware Installation

Mounting and bolt congurations

Installation on concrete

Concrete mounting is used in an outdoor GAP configuration. The same mounting can be used
for an indoor rack mounting on a concrete floor.
Refer to Figure 4-1
or rack mounting brackets.

Figure 4-1 Concrete mounting

LARGE FLAT
WASHER
PRELIMINARY ILLUSTRATION
Installation on wooden oor
Wooden floor mounting is typically used in an indoor GAP , rack mounting configuration.
4-6
Due to the weight of the GAP cabinet, the supporting structure (concrete slab) must
be able to withstand at least 1000 lbs (500 kg).
for a typical cross - section of the concrete bolt mounting to the GAP cabinet
PRELIMINARY - UNDER DEVELOPMENT
Chapter 4: Indoor GAP Hardware Installation
HILTI-BOLT
HSL-3M 8/20
OPTIONAL
MOUNTING
ISOLATION
WASHER BRACKET
ISOLA TION
PAD
(AFFIXED
TO
BRACKET)
ti-cdma-05742-cnc.eps
68P09286A73-1
JUL 2007