Motorola MOTOwi4 25600 Hardware Installation
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Wireless Access Point
  5. MOTOwi4 25600
  6. Hardware installation
Motorola MOTOwi4 25600 Hardware Installation

Motorola MOTOwi4 25600 Hardware Installation

2.5ghz diversity access point, ground based access point gap
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
APPLICANT: MOTOROLA
Cellular Networks
FCC ID: IHET7HM1
Users Manual Exhibit
2.5GHz MOTOwi4™ 25600 Diversity Access Point
TM
FCC Filing – WAP25600 MOTOwi4
Diversity Access Point @ 2.5GHz
1 of 1

Advertisement

Table of Contents
loading

Related Manuals for Motorola MOTOwi4 25600

Summary of Contents for Motorola MOTOwi4 25600

  • Page 1 APPLICANT: MOTOROLA Cellular Networks FCC ID: IHET7HM1 Users Manual Exhibit 2.5GHz MOTOwi4™ 25600 Diversity Access Point FCC Filing – WAP25600 MOTOwi4 Diversity Access Point @ 2.5GHz 1 of 1...
  • Page 2 Ground Based Access Point (GAP) Hardware Installation 68P09286A73-1 JUL 2007 PRELIMINARY - UNDER DEVELOPMENT © 2006 Motorola, Inc. All Rights Reserved...
  • Page 3 Motorola, Inc. License Agreements The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

  • Page 4: Table Of Contents

    Motorola document set ........
  • Page 5 Contents Tools and Materials ........Introduction .
  • Page 6 Ground Based Access Point (GAP) Hardware Installation Contents Cage to cage ......... External cabling to rack .
  • Page 7 Contents Chapter 8: XXXXXXXXXXXX Chapter 9: XXXXXXXXXXXX Chapter 10: XXXXXXXXXXXX Chapter 11: XXXXXXXXXXXX Appendix A: Alternate RF Head Installation Procedure Appendix B: Alternate RGPS Installation Appendix C: MMI Cable Fabrication 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 8 List Figures List of Figures ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 9 List of Figures 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 10 List Tables List of Tables ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 11 List of Tables viii 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 12: Ground Based Access Point (Gap) Hardware Installation

    About This Manual Ground Based Access Point (GAP) Hardware Installation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 13: Revision History

    Revision history Revision history ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 14: General Information

    It is recommended that all personnel engaged in such activities be properly trained by Motorola. Motorola disclaims all liability whatsoever, implied or express, for any risk of damage, loss or reduction in system performance arising directly or indirectly out of the failure of the customer, or anyone acting on the customer’s behalf, to abide by the instructions, system parameters,...

  • Page 15: Text Conventions

    General information Text conventions The following conventions are used in the Motorola cellular infrastructure documents to represent keyboard input text, screen output text, and special key sequences. Input Characters typed in at the keyboard are shown like this. Items of interest within a command appear like this.

  • Page 16: Contacting Motorola

    ■ ■ ■ Motorola appreciates feedback from the users of our documents. 24–hour support If you have problems regarding the operation of your equipment, contact the Customer Network Resolution Center (CNRC) for immediate assistance. The 24–hour telephone numbers are listed at https://mynetworksupport.motorola.com.

  • Page 17: Security Advice

    ■ ■ ■ Motorola systems and equipment provide security parameters that can be configured by the operator based on their particular operating environment. Motorola recommends setting and using these parameters following industry recognized security practices. Security aspects to be considered are protecting the confidentiality, integrity, and availability of information and assets.

  • Page 18: Warnings, Cautions, And Notes

    ■ ■ The following describes how warnings and cautions are used in this document and in all documents of this Motorola document set. Warnings Warnings precede instructions that contain potentially hazardous situations. Warnings are used to alert the reader to possible hazards that could cause loss of life or physical injury. A warning has the following format: Warning text and consequence for not following the instructions in the warning.

  • Page 19: Safety

    • Power down or unplug the equipment before servicing. • Using non-Motorola parts for repair could damage the equipment or void warranty. Contact Motorola Warranty and Repair for service and repair instructions. • Portions of Motorola equipment may be damaged from exposure to electrostatic discharge.

  • Page 20: Caring For The Environment

    European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) Do not dispose of Motorola equipment in landfill sites. In the EU, Motorola in conjunction with a recycling partner ensures that equipment is collected and recycled according to the requirements of EU environmental law.

  • Page 21: Cmm Labeling And Disclosure Table

    CMM labeling and disclosure table CMM labeling and disclosure table ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 22: Motorola Document Set

    Without internet access available, order hard copy documents or CD-ROMs with your Motorola Local Office or Representative. If Motorola changes the content of a document after the original printing date, Motorola publishes a new version with the same part number but a different revision character.

  • Page 23: Supplemental Information

    ■ ■ ■ Third party computer software and trademarks Computer software The following is a list of the 3rd party computer software copyrights contained within this Motorola product. Company Copyright Apache Software Foundation* Copyright 2002-2007 All rights reserved. Artesyn Copyright 2002-2007 All rights reserved.

  • Page 24: Fcc Requirements

    FCC requirements FCC requirements ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 25 FCC requirements Part 15.21 - Information to user Changes or modifications that change the FCC type approved configuration of the equipment could void the user’s authority to operate the equipment. 15.105(b) - Information to user This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 26 FCC requirements DAP label and location A label similar to the one illustrated is located as shown. All symbols may not display on the label depending on the market. ti_cdma_wimaxdap.eps BCU label A label similar to the one illustrated is located on the equipment. All symbols may not display on the label depending on the market.
  • Page 27 FCC requirements 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 28: Chapter 1: Overview

    Chapter Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 29: Introduction

    ■ ■ ■ ■ This document provides information pertaining to the hardware and cabling installation for the Motorola outdoor and indoor (19 – inch rack) version of the Ground Based Access Point (GAP) Hardware. does not include This hardware installation manual card and module placement, applying power, tuning, network configuration, software site commissioning, troubleshooting, etcetera.

  • Page 30: Product Description

    ■ ■ ■ Motorola Ground – based Access Point (GAP) hardware is made up of three main component assemblies; the Base Transceiver (sub) System (BTS) and the Battery Backup Unit (BBU). Two configurations are available; an indoor GAP , and an outdoor GAP . The indoor configuration is mounted in a standard 19–inch rack.

  • Page 31: Manual Order

    Manual Order Chapter 1: Overview Manual Order ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 32: Recommended Documents

    Site Document (generated by Systems Engineering), which includes: site specific documentation channel allocation contact list (customer) ancillary/expendable equipment list site wiring lists contact list (Motorola support) job box inventory • Demarcation Document (Scope of Work agreement) • Motorola Installation manuals for non- equipment (for reference purposes).

  • Page 33: Abbreviations And Acronyms

    Abbreviations and Acronyms Chapter 1: Overview Abbreviations and Acronyms ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 34: Tools And Materials

    Drill holes in wood and light concrete or 1/2-in drive masonry drill bits (Standard set may be adequate) Customer Supplied Bucklestrap Cutting Tool (Motorola P/N 6604809N01) For the pole mounting brackets Tape Measure Customer Supplied General purpose measurement Tin Snips...
  • Page 35 Tools and Materials Chapter 1: Overview Table 1-2 Tools and Materials (Continued) Hand Tool Materials Purpose Electrical Tape Customer Supplied General purpose Adjustable Crescent Wrench Customer Supplied General purpose Torx Screw Driver Set (T30 Customer Supplied General purpose and lower) Tie-Wraps Customer Supplied General purpose, varying lengths.

  • Page 36: Chapter 2: Site Preparation

    Chapter Site Preparation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 37: General

    General Chapter 2: Site Preparation General ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 38: Site Preparation Overview

    Ground Based Access Point (GAP) Hardware Installation Site Preparation Overview Site Preparation Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 39: Initial Site Inspection

    Initial site inspection Chapter 2: Site Preparation Initial site inspection ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 40 Ground Based Access Point (GAP) Hardware Installation Initial site inspection • General safety inspection to ensure a safe working environment for personnel and protection of equipment. • Lighting and power for installation and maintenance personnel. • Configuration of the GAP cabinets, either side - by - side or stacked. •...

  • Page 41: Prepare Site For Equipment Arrival

    Prepare Site for Equipment Arrival Chapter 2: Site Preparation Prepare Site for Equipment Arrival ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 42 Ground Based Access Point (GAP) Hardware Installation Prepare Site for Equipment Arrival Procedure 2-1 Procedure to prepare the site for the GAP equipment (Continued) • There is clear access to move the equipment to the desired mounting area • There is sufficient space for installation and service access to the equipment •...

  • Page 43: Site Layout Inspection

    Site layout inspection Chapter 2: Site Preparation Site layout inspection ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 44: Shipping And Handling

    Ground Based Access Point (GAP) Hardware Installation Shipping and Handling Shipping and Handling ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 45: How Equipment Arrives

    Shipping and Handling Chapter 2: Site Preparation • The BTS cabinet is shipped with the BCU cage with all cards/modules and internal cabling installed. • The BBU cabinet is shipped with all batteries and internal cabling installed. • Depending on the ordered configuration, the TRX cage can be in either the BTS cabinet and / or the BBU cabinet.

  • Page 46: Unpacking

    Ground Based Access Point (GAP) Hardware Installation Unpacking Unpacking ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 47: Unpacking Procedure

    Unpacking Chapter 2: Site Preparation Figure 2-1 GAP cabinet - lifting and mounting bracket locations PRELIMINARY ILLUSTRATION Unpacking procedure Procedure 2-2 2-12 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 48: Indoor Gap

    Ground Based Access Point (GAP) Hardware Installation Unpacking Indoor GAP The indoor BCU and TRX cages are internally cabled and installation mainly consists of mounting the cages in the indoor rack, grounding cabling, main power cabling, cabling between the cages, and cabling between the TRX modules and the RF antenna(s). Unpacking procedure Procedure 2-3 68P09286A73-1...
  • Page 49 Unpacking Chapter 2: Site Preparation 2-14 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 50: Chapter 3: Cable Descriptions

    Chapter Cable Descriptions ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 51: Overview

    Overview Chapter 3: Cable Descriptions Overview ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 52: Configurations Supported

    Ground Based Access Point (GAP) Hardware Installation Congurations Supported Congurations Supported ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 53: Cable Installation Order

    Cable Installation Order Chapter 3: Cable Descriptions Cable Installation Order ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 54: Cable Descriptions And Part Numbers

    T472AD RGPS cable, 152 m (500 ft.) T472AE RGPS cable, 304 m (1000 ft.) T472AF RGPS cable, 608 m (2000 ft.) Part of Motorola Kit. SGRG4030A Assembly, Receiver, GPS, RF Module CGDSGPSKITF4NM50 Antenna, GPS, with mounting and 50 ft. cable.
  • Page 55 (Customer supplied) to BCU SGKN4386 Punch block to BCU I/O board, 15–pin D-connector on one end and loose wires on the other end. Cable is Motorola P/N 3086433H12 Customer Supplied DC power cable, 8–10 AWG, 10 m 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT...

  • Page 56: Cable Lengths

    Ground Based Access Point (GAP) Hardware Installation Cable Lengths Cable Lengths ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 57 Cable Lengths Chapter 3: Cable Descriptions 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 58: Chapter 4: Indoor Gap Hardware Installation

    Chapter Indoor GAP Hardware Installation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 59: Indoor (Rack - Mount) Gap Installation

    Indoor (rack - mount) GAP installation Chapter 4: Indoor GAP Hardware Installation Indoor (rack - mount) GAP installation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 60: Indoor Gap Product Identification

    Ground Based Access Point (GAP) Hardware Installation Indoor GAP product identication Indoor GAP product identication ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 61: Rack Mounting Configuration

    Rack mounting conguration Chapter 4: Indoor GAP Hardware Installation Rack mounting conguration ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 62: Mounting And Bolt Configurations

    Figure 4-1 Figure 4-2. The isolation washer depicted in the figures is Motorola combination washer and bushing. recommends that the isolation washer be used, particularly for ease of installation, vibration supression, and particularly for maintaining electrical ground isolation.

  • Page 63: Installation On Concrete

    Mounting and bolt congurations Chapter 4: Indoor GAP Hardware Installation Installation on concrete Concrete mounting is used in an outdoor GAP configuration. The same mounting can be used for an indoor rack mounting on a concrete floor. Due to the weight of the GAP cabinet, the supporting structure (concrete slab) must be able to withstand at least 1000 lbs (500 kg).
  • Page 64 Ground Based Access Point (GAP) Hardware Installation Mounting and bolt congurations Due to the weight of the GAP components and rack, the supporting structure (oor deck) must be able to withstand at least 1000 lbs (500 kg). A structural oor support, such as an iron I-beam, underneath the wooden oor is recommended.

  • Page 65: Installation Of Gap Cages In The Indoor Rack

    Installation of GAP cages in the indoor rack Chapter 4: Indoor GAP Hardware Installation Installation of GAP cages in the indoor rack ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 66: Rack Cabling With Cages Installed

    Ground Based Access Point (GAP) Hardware Installation Rack cabling with cages installed Rack cabling with cages installed ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 67 Rack cabling with cages installed Chapter 4: Indoor GAP Hardware Installation 4-10 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 68: Chapter 5: Outdoor Gap Hardware Installation

    Chapter Outdoor GAP Hardware Installation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 69: Outdoor (Cabinet - Mount) Gap Installation

    Outdoor (cabinet - mount) GAP installation Chapter 5: Outdoor GAP Hardware Installation Outdoor (cabinet - mount) GAP installation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 70: Outdoor Gap Product Identification And Configurations

    Ground Based Access Point (GAP) Hardware Installation Outdoor GAP product identication and congurations Outdoor GAP product identication and congurations ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 71: Gap Concrete Slab Mounting

    GAP concrete slab mounting Chapter 5: Outdoor GAP Hardware Installation GAP concrete slab mounting ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 72: Figure 5-1 Single Cabinet Mounting

    Ground Based Access Point (GAP) Hardware Installation GAP concrete slab mounting Figure 5-1 Single cabinet mounting PRELIMINARY ILLUSTRATION 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 73: Cabinet Mounting

    GAP concrete slab mounting Chapter 5: Outdoor GAP Hardware Installation Figure 5-2 Dual cabinet mounting PRELIMINARY ILLUSTRATION Cabinet mounting Depending on how the external power and interconnections are run to the cabinets, this will determine if the GAP cabinets are mounted on a support between the concrete slab and the cabinet(s).

  • Page 74: Conduit Routed Through Back Of Bts Cabinet

    Ground Based Access Point (GAP) Hardware Installation GAP concrete slab mounting Figure 5-3 GAP BTS cabinet “mud room” PRELIMINARY ILLUSTRATION Conduit routed through back of BTS cabinet Figure 5-4 shows the conduit routed through the back of the BTS cabinet. This will not require a support between the cainet and the conrete slab.

  • Page 75: Conduit Routed Through Bottom Of Bts Cabinet

    GAP concrete slab mounting Chapter 5: Outdoor GAP Hardware Installation Figure 5-4 “Mud room” conduit routed through back of BTS cabinet PRELIMINARY ILLUSTRATION Conduit routed through bottom of BTS cabinet Figure 5-5 shows the conduit routed through the bottom of the BTS cabinet. This will require a support between the cainet and the conrete slab.

  • Page 76: I-Beam Support

    Ground Based Access Point (GAP) Hardware Installation GAP concrete slab mounting Figure 5-5 “Mud room” conduit routed through bottom of BTS cabinet PRELIMINARY ILLUSTRATION I-beam support To elevate the GAP cabinet from the concrete mounting, an I-beam support can be used. Three I-beams are required for even support of the GAP cabinet.

  • Page 77: Figure 5-6 I-Beam Support For A Single Gap Cabinet

    GAP concrete slab mounting Chapter 5: Outdoor GAP Hardware Installation Figure 5-6 I-beam support for a single GAP cabinet PRELIMINARY ILLUSTRATION Figure 5-7 I-beam support for two GAP cabinets PRELIMINARY ILLUSTRATION 5-10 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 78: Outdoor Mounting And Bolt Configurations

    Ground Based Access Point (GAP) Hardware Installation Outdoor mounting and bolt congurations Outdoor mounting and bolt congurations ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 79: Concrete Pad Installation And Ground System

    Concrete pad installation and ground system Chapter 5: Outdoor GAP Hardware Installation Concrete pad installation and ground system ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 80: Conduit Routing Through Concrete Slab

    Ground Based Access Point (GAP) Hardware Installation Concrete pad installation and ground system Figure 5-8 Ground ring layout GROUNDING RING #3 BSWG GROUND TO CABINET (1 PER CABINET) #3 BSWG 2438 mm (#2 AWG;35 mm ) SOLID (#2 AWG;35 mm ) SOLID COPPER W/TIN COATING (96IN.) COPPER W/TIN COATING...

  • Page 81: Gap Side - By - Side Configuration

    GAP side - by - side conguration Chapter 5: Outdoor GAP Hardware Installation GAP side - by - side conguration ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 82: Gap Stacked Configuration

    Ground Based Access Point (GAP) Hardware Installation GAP stacked conguration GAP stacked conguration ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 83: Gap Cabinet Cabling

    GAP Cabinet cabling Chapter 5: Outdoor GAP Hardware Installation GAP Cabinet cabling ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 84: Chapter 6: Optional Equipment

    Chapter Optional Equipment ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 85 GAP Cabinet cabling Chapter 6: Optional Equipment 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 86: Chapter 7: What's Next And Cleanup

    Chapter What’s Next and Cleanup ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 87: Introduction

    Introduction Chapter 7: What’s Next and Cleanup Introduction ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 88: Site Cleanup

    Place all hand and power tools in the installation tool kit or other appropriate place. Note any tools that need replacement, cleaning, or adjustment. Keep any tools unique to the Motorola equipment either at the site, or in an appropriate safe place for later use if needed, as specified by the site manager.
  • Page 89 Site Cleanup Chapter 7: What’s Next and Cleanup • Check for any safety hazards and correct if necessary as specified by the site manager. • Site specific documentation • Product manuals • Other third-party installation documentation • A copy of the installation checklist provided in this manual 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

  • Page 90: Installation Checklist

    Ground Based Access Point (GAP) Hardware Installation Installation checklist Installation checklist ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...

  • Page 91: Table 7-2 Checklist

    Installation checklist Chapter 7: What’s Next and Cleanup Table 7-2 Checklist Item Item Notes Equipment is not damaged. Air flow clearance requirements are met. Door opening clearance requirements are met. If indoor installation; GAP rack is securely mounted to floor. If outdoor installation;...
  • Page 92 Ground Based Access Point (GAP) Hardware Installation Installation checklist Table 7-2 Checklist (Continued) Item Item Notes RF Head is grounded. RGPS is cabled to BCU. RGPS head and mast are secure. RGPS connection is protected by lightning arrestors (if applicable). RGPS head has a clear view of the sky and is not in a location which accumulates debris.
  • Page 93 Installation checklist Chapter 7: What’s Next and Cleanup 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 94 Chapter XXXXXXXXXXXX ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 95 Installation checklist Chapter 8: XXXXXXXXXXXX 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 96 Chapter XXXXXXXXXXXX ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 97 Installation checklist Chapter 9: XXXXXXXXXXXX 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 98 Chapter XXXXXXXXXXXX ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 99 Installation checklist Chapter 10: XXXXXXXXXXXX 10-2 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 100 Chapter XXXXXXXXXXXX ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■...
  • Page 101 Installation checklist Chapter 11: XXXXXXXXXXXX 11-2 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 102 Appendix Alternate RF Head Installation Procedure 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 103 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 104 Appendix Alternate RGPS Installation 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 105 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...
  • Page 106 Appendix MMI Cable Fabrication 68P09286A73-1 PRELIMINARY - UNDER DEVELOPMENT JUL 2007...

Table of Contents