Motorola MOTOwi4 25600 Hardware Installation page 40

Ground Based Access Point (GAP) Hardware Installation
•
General safety inspection to ensure a safe working environment for personnel and
protection of equipment.
•
Lighting and power for installation and maintenance personnel.
•
Configuration of the GAP cabinets, either side - by - side or stacked.
•
Appropriate general space to install the GAP cabinets.
•
Availability of appropriate electrical ground connections for the GAP equipment.
•
Access to, and routing of; input power, RF output, and general interconnection cabling
space for the GAP cabinets.
•
Availability of appropriate rated input power; battery or main line voltage and current.
•
Configuration and position of the concrete pad(s) to mount GAP cabinets.
•
Level surface and the appropriate weight bearing characteristics of the concrete pad(s).
•
Mounting structure for cable routing or environmental conditions; direct concrete
mounting or with bottom I-beam support.
•
Minimum distance to access the front and rear of the GAP equipment.
•
Minimum clearance to open doors and panels on the front and rear of the GAP cabinets.
•
Minimum distance for air flow circulation around the GAP equipment.
•
Staging area for equipment arrival, unpacking, and transportation equipment for moving
the GAP cabinets..
•
Compliance with any site engineering documentation and specifications.
68P09286A73-1
PRELIMINARY - UNDER DEVELOPMENT
Initial site inspection
2-5
JUL 2007