Ground Based Access Point (GAP) Hardware Installation
Unpacking
■
■
■
■
■
■
■
■
■
■
■
■
■
■
This section describes unpacking the various units for the GAP .
GAP equipment
The GAP equipment is shipped either as and indoor unit and as an outdoor unit. The indoor unit
includes the BCU and TRX cages and is designed to fit in a standard 19–inch rack. The outdoor
unit is comprised of two outdoor cabinets, the BTS and BBU. Both the BTS and BBU cabinets are
pre-configured per order, and shipped with the internal cabling included.
Outdoor GAP
Installation of the two outdoor cabinets (BTS and BBU) mainly consists of mounting the unit,
grounding cabling, main power cabling, cabling between cabinets and cabling between the
TRX modules and the RF antennas.
68P09286A73-1
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PRELIMINARY - UNDER DEVELOPMENT
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Unpacking
■
■
■
■
■
■
■
■
2-11
JUL 2007