DRIVE GROUND FAULT
Condition
Action
Exit
DRIVE LOW VOLTAGE
Condition
Action
Exit
DRIVE INTERNAL
Condition
Action
Exit
DRIVE EXCEPTION
Condition
Action
Exit
8514-290-001 REV B page 34
Mode.
This error occurs when the control receives a message that the
drive has experienced a ground fault condition.
When detected, the control turns off the motor and all relays.
There is no delay in the action once the criteria are met.
The machine will not start and the Error Code will continue to be
displayed until the condition no longer exists and the prompt is
followed to Reset the Error Code and return the Machine to Idle
Mode.
This error occurs when the control receives a message that the
drive has experienced a low voltage condition.
When detected, the control turns off the motor and all relays.
There is no delay in the action once the criteria are met.
The machine will not start and the Error Code will continue to be
displayed until the condition no longer exists and the prompt is
followed to Reset the Error Code and return the Machine to Idle
Mode.
This error occurs when the control receives a message that the
drive has experienced an internal error.
When detected, the control turns off the motor and all relays.
There is no delay in the action once the criteria are met.
The machine will not start and the Error Code will continue to be
displayed until the condition no longer exists and the prompt is
followed to Reset the Error Code and return the Machine to Idle
Mode.
This error occurs when the control receives a message that the
drive has logged an exception code.
When detected, the control turns off the motor and all relays.
There is no delay in the action once the criteria are met.
The machine will not start and the Error Code will continue to be
displayed until the condition no longer exists and the prompt is
followed to Reset the Error Code and return the Machine to Idle