Fix retaining bracket to the back of
filler panel .
Pull the wine unit as far as you need
to out of the niche so that you can tilt
it towards you.
Loosely hand-screw the retaining
bracket with the filler panel to
the wine unit.
Align the filler panel to the wine unit
door using the long slots to give a
flush finish.
Now tighten the screws.
You can now push the wine unit into
the niche.
Installing the wine conditioning unit
Push the wine conditioning
unit into the niche
does not become trapped or dam-
aged as you push the wine condi-
tioning unit into its niche.
To avoid damaging flooring which is
susceptible to scratching, take great
care when pushing the appliance into
its niche.
Push the wine conditioning unit into
the niche until the front of the appli-
ance door is flush with adjacent fur-
niture doors.
Pull the wine conditioning unit for-
ward so that it stands proud of the
furniture doors evenly by 2 mm.
Make sure that the mains cable
53