Safety lock
The safety lock can be activated to pre-
vent the wine unit being switched off by
mistake.
Activating or deactivating the lock
Touch and keep your finger on the
DynaCool On/Off sensor for approx. 5
seconds.
The sensor's indicator light flashes and
a c flashes in the temperature display
for the lower wine conditioning zone
(display on the right).
Touch the DynaCool On/Off sensor
again.
By pressing the sensors for setting
the temperature, you can now choose
between and :
: Lock function is deactivated,
: Lock function is activated.
Selecting further settings
To save the setting, touch the
DynaCool On/Off sensor.
When the lock function is activated, its
indicator lights up.
To exit settings mode, touch the On/
Off sensor for the whole wine unit.
Otherwise the appliance will switch to
normal operation after approximately
two minutes.
19