Adam Equipment CRW Series Manual page 8

4.0 PARAMETER
4.1 Enter setting mode
4.2 PARAMETER SETTING TABLE
FUNCTION DESCRIPTION
Sets division
: high resolution
: standard resolution
: low resolution
Sets zero tracking range
Sets baud rate (RS-232 is an optional function)
: 600bps,
: 1200bps
:2400bps,
: 4800bps
@Adam Equipment Company 2004
: 9600bps
6
Turn off the power of the scale and
then turn the power on again.
Press the [ZERO]
key at the same time during self-
checking. Display shows "
asking for the password. Input the
password using the
move the active digit and the
key to increment a
[CHANGE]
digit. Press [ZERO]
The default password is "
Display shows "
the scale has entered the setting
mode. Press the [CHANGE]
shift the parameter items, use
[ZERO] key to confirm and the
[LOCK] key to escape from setting
the current item.
and [CHANGE]
",
key to
[LOCK]
to confirm.
",
", indicating
key to
DEFAULT