Redundancy Configuration - Emerson Rosemount 2460 System Hub Reference Manual

Configuration
October 2018
4.3.7

Redundancy configuration

Setting up a redundant pair of Rosemount 2460 system hubs can be done by using TankMaster WinSetup
or the Web Graphical Interface. This section describes the redundancy setup in the WinSetup
configuration wizard for the Rosemount 2460 System Hub. See
page 80
The installation wizard for the Rosemount 2460 includes the option to setup a redundant pair of
Rosemount 2460 System Hubs as long as certain conditions are fulfilled. See
redundancy setup" on page 53
Redundancy configuration is part of the TankMaster WinSetup installation wizard for the Rosemount
2460 System Hub. In case all requirements for pairing are fulfilled (see
setup" on page
Click the Create New Pair button to start the redundancy synchronization procedure. When finished, a
message appears that the database synchronization was successfully completed. The system hubs will
be paired as a Primary and a Backup device.
76
for a description of how to use the Web interface for redundancy configuration.
for more information.
53), the following text appears: "Pairing is possible, Backup device ID:xx".
Reference Manual
00809-0100-2460, Rev DE
"Redundancy setup via Web GUI" on
"Preconditions for
"Preconditions for redundancy
Configuration