Service and Troubleshooting
October 2018
6.21
Redundancy
The Redundancy tab lets you pair two Rosemount
can be configured for redundancy operation. See
information on how to setup redundant system hubs.
6.21.1
Pairing two system hubs
1. Open the Web Graphical User Interface (GUI). See section
more information on how to use the Web GUI.
2. Select the Redundancy menu option.
3. Expand the Pair option and verify that a green symbol indicates that the two devices can be paired.
4. Click the Pair button.
5. Verify that the redundant system hubs are successfully paired and changed to redundancy mode.
140
™
2460 System Hubs. Once paired, the system hubs
"Redundancy setup via Web GUI" on page 80
"Using the web interface" on page
Reference Manual
00809-0100-2460, Rev DE
for more
114) for
Service and Troubleshooting