Section Overview - Emerson Rosemount 2460 System Hub Reference Manual

Reference Manual
00809-0100-2460, Rev DE
1.3

Section overview

The sections in this manual provide information on installing, operating, and maintaining the
Rosemount
Section 2: Overview
Gauging system and recommended installation procedure.
Section 3: Installation
Section 4: Configuration
TankMaster WinSetup configuration program. This section includes inventory calculations and how to
setup a pair of redundant system hubs.
Section 5: Operation
Section 6: Service and Troubleshooting
Appendix A: Specifications and Reference Data
ordering table.
Appendix B: Product Certifications
Appendix C: Enraf® Device Configuration
database using the TankMaster WinSetup configuration program. It also covers how to configure fast
polling and how to enable Vapor Temperature.
Appendix D: Servo Commands
servo tanks.
Appendix E: Whessoe Device Configuration
Rosemount 2460 for Whessoe devices.
Appendix F: Modbus® Standard Question
from a Modbus master.
Appendix G: Fast Polling
Appendix H: L&J Device Configuration
2460 for L&J devices.
Appendix I: Varec® Device Configuration
Rosemount 2460 for L&J devices.
Appendix J: Enraf® 858 CIU Configuration
CIU emulation.
Introduction
™
2460. The sections are organized as follows:
provides a brief description of the various components in a Rosemount Tank
covers installation considerations as well as mechanical and electrical installation.
describes how to configure the Rosemount 2460 System Hub by using the
describes what information that is provided by the Light Emitting Diodes (LED).
contains information on approvals and certifications.
describes various commands that can be used for tanks configured as
describes how to enable and configure fast polling for varioius devices.
covers tools, troubleshooting, and various service instructions.
contains specifications, dimensional drawings, and
describes how to configure the Rosemount 2460 tank
describes how to configure the tank database of the
lists the database registers which can be scanned in queries
describes how to configure the tank database of the Rosemount
describes how to configure the tank database of the
describes how to configure the Rosemount 2460 for Enraf 858
Introduction
October 2018
3