Brocade Communications Systems VDX 6940 Series Hardware Installation Manual page 100

FIGURE 50 Unlatching and removing fan assembly
4. Install the new fan assembly in the chassis using the following steps:
a) Orient the new fan assembly with the captive screw on the upper right, as shown in the following illustration.
b) With one hand, hold the handle on the front panel of the fan. With the other hand, support the underside of the fan, and
then insert it into the empty fan slot. Slide the new fan into the chassis until the latch engages.
100
Removal and Replacement Procedures
Brocade VDX 6940 Hardware Installation Guide
53-1003495-06