Servicing - ResMed AirMini Clinical Manual

On / Off. (IEC 60601-1) Protected against finger sized objects and against dripping water
when tilted up to 15 degrees from specified orientation. (IEC 60601-1-11) Direct current.
(IEC 60601-1) Type BF applied part.( IEC 60601-1) Class II equipment. (IEC60601-1)
Humidity limitation. (ISO 15223-1) Temperature limitation. (ISO 15223-1) Non-ionising
radiation. (IEC60601-1-2) Bluetooth. (Bluetooth Brand guide) Prescription only (In the
US, Federal law restricts these devices to sale by or on the order of a physician). (21 CFR 801)
Operating altitude. Atmospheric pressure limitation. (ISO 15223-1) Complies with
RTCA DO-160 section 21, category M. MR unsafe (do not use in the vicinity of an MRI device).
(ASTM F2503) Replace 30 days after opening. Do not use if package is damaged. (ISO
15223-1). Contains no China environmental hazardous substances (SJ/T11364-2006) 10
years of China environmental protection use period. (SJ/T11364-2006)
Environmental information (EU directive 2012/19/EE Waste Electrical and Electronic
Equipment (WEEE))
This machine should be disposed of separately, not as unsorted municipal waste. To dispose of your
machine, you should use appropriate collection, reuse and recycling systems available in your region.
The use of these collection, reuse and recycling systems is designed to reduce pressure on natural
resources and prevent hazardous substances from damaging the environment.
If you need information on these disposal systems, please contact your local waste administration.
The crossed-bin symbol invites you to use these disposal systems. If you require information on
collection and disposal of your ResMed machine please contact your ResMed office, local distributor
or go to www.resmed.com/environment.

Servicing

The AirMini machine is intended to provide safe and reliable operation when operated in accordance
with the instructions provided by ResMed. ResMed recommends that the AirMini machine be
inspected and serviced by an authorised ResMed Service Centre if there is any sign of wear or
concern with device function. Otherwise, service and inspection of the products generally should
not be required during their design life.
30