For Windows 2000 Users - Epson Expression 1680 Setup Manual

For Windows 2000 users

Follow the steps below to install EPSON TWAIN using the Plug
and Play feature.
1. Connect your scanner to your computer and turn on the
scanner and then your computer.
Note:
It is important to follow this power on sequence if you are using a
SCSI interface. Otherwise the Plug and Play feature will not work.
2. The first time you turn on the computer after turning on the
scanner, the dialog box shown below appears. Insert your
scanner software CD in the CD-ROM drive, then click Next.
3-10
Installing the Software