Epson Expression 1680 Setup Manual page 85

Note:
If you need to change any settings in the EPSON TWAIN Pro
Network setup dialog box after setup is complete, double-click the
EPSON TWAIN Pro Network icon in the Control Panel.
8. Specify the IP address or Host name of the scanner server PC
in the Network Scanner Address box.
Note:
For details on specifying the IP address, see "Setting the
Scanner Server PC's IP Address" on page 3-36.
A host name can be used on networks that use the DNS, WINS,
or LMHOSTS naming services.
9. Specify a Timeout Setting between 30 and 300 seconds.
Normally you do not need to change this value.
10. To test the status of the scanner, click Test.
After the test is complete, information about the scanner's
status is displayed below the heading Scanner Status.
11. After setting this dialog box, click OK.
Installation of EPSON TWAIN Pro Network is complete.
Installing the Software
3
3-41