Setting The Terminator Switch - Epson Expression 1680 Setup Manual

ID Availability
7 Not available for Macintosh
May not be available for
PCs.
Not available
* Scanner will not work if selected.
c
Caution:
Do not set the SCSI ID to an ID number that is already assigned
to another device. Otherwise the computer, scanner, and other
devices will not operate properly.

Setting the terminator switch

The scanner has a built-in terminator, which allows SCSI devices
to communicate properly with each other. Depending on your
computer system, you may need to change the terminator switch
setting.
Note:
Do not use an external terminator.
Description
Always used for the
Macintosh itself
Usually used for the PC's SCSI
board
For transportation purposes.*
See "Transporting the
Scanner and the
Transparency Unit" in the
Maintenance and
Troubleshooting section of
the online Reference Guide.
The terminator switch is located
at the rear of the scanner.
Setting Up the Scanner
2
2-11