Install The Epson Twain Driver; If You're Running Windows 98 Or Windows 2000 - Epson Perfection 1640SU Office Scanner Basics

Epson perfection 1640su: user guide

Hide thumbs Also See for Perfection 1640SU Office:

Table of Contents

Connect the Scanner to Your Computer

Make sure the scanner, computer, and any SCSI devices connected to

your computer are turned off. The scanner is off when the

button is out (not pushed down below the surface of the panel).

Attach your SCSI cable to the scanner. The scanner is self-terminated and must be the

last device in the chain.

Your scanner does not include a SCSI cable. The length of the SCSI cable

must not exceed 9.8 feet (3 meters). If you are connecting multiple SCSI

devices, the total length of the SCSI bus (cables) must not exceed

19.7 feet (6 meters); otherwise the system may not work properly.

Install the EPSON TWAIN Driver

The scanner comes with two CD-ROMs: one for Adobe

for your EPSON TWAIN driver, scanner software, bonus software, and electronic

documentation. If you have the EPSON Perfection 1640SU or the EPSON

Perfection 1640SU PHOTO, your scanner also includes a third CD-ROM with

Adobe Photoshop

You may be asked to insert your Windows operating system CD-ROM during the

scanner installation. Have your Windows CD-ROM handy, in case you need it.

The illustrations in this section show Windows 98 screens. The screens in

Windows 2000 look different, but the steps are almost identical; any

differences are noted in the instructions below.

Setting Up Your Scanner

5.0 LE.

Operate

PhotoDeluxe

and the other

Table of Contents

G754a