Siemens SIMATIC PCS 7 SMART Getting Started page 102

Creating CFCs
6.7 CFCs in the process object view
9. Enter the name of the block in the "Display" input box: "VALVE".
The program updates the table. You see exactly three I/Os for each chart.
10.Go to the "Value" column and enter the values as listed in the table below.
The following applies to the "Value" column:
– Position the cursor in the appropriate field. This changes the field into a drop-down list.
– Select the desired item in the drop-down list.
102
CFC I/O
CFC_NK111 Feature.Bit16
Monitor
AutModLi
CFC_NK112 Feature.Bit16
Monitor
AutModLi
CFC_NK113 Feature.Bit16
Monitor
AutModLi
CFC_NK114 Feature.Bit16
Monitor
AutModLi
Meaning
Specify the initial valve state (open/
closed)
Disable monitoring of feedback from the
process for the example
Switch the valve to automatic mode
See above
See above
See above
See above
See above
See above
See above
See above
See above
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA
Value
0
0
1
0
0
1
1
0
1
1
0
1