Working With The Master Data Library - Siemens SIMATIC PCS 7 SMART Getting Started

Basic procedure
Step
1
2
3
6.2.3

Working with the master data library

Creating a master data library for a large project requires detailed planning before the CFC
charts are actually created. In this Getting Started, we will provide you with all the blocks you
require for the "color_gs" project. These objects are listed in the table below.
Legend for the tables
● Object name: This is an alphanumeric code for the block that is displayed in PCS 7 SMART.
● Symbolic name: Short descriptive name for the block.
● Meaning: Short description of the purpose of this block.
● Type of block: Defines the block category.
● Associated CFC: Returns all CFCs where the block is installed.
Master data library blocks
Store the required blocks in your master data library. You need the following blocks for the
"color_gs" project:
Object
name
FB1809
FB1823
FB1828
FB1845
FB1866
FB1869
FB1870
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA
Action
Open library (Page 64)
Store all blocks in your master data library (Page 65)
The PCS 7 wizard automatically generates the master data library when you create a
project.
Store process tag types in the master data library (Page 67)
Symbolic Meaning
name
DoseL Dosing of materials (quantity and flow) Dosing block
Integral Generates the time integral of an input
value
Lag Smoothing the input value (low-pass
filter)
MonAnL Monitors an analog measured value
OpDi01 Manipulates a digital value
Pcs7AnIn Processes an analog input value sig‐
nal
Pcs7AnOu Processes an analog output value sig‐
nal
Creating CFCs
6.2 Working with libraries
Type of Associated
block CFC
CFC_FC111
Mathematical CFC_LI111
block
CFC_FC111
Mathematical CFC_LI111
block
Monitoring block CFC_LI111
Operator control CFC_FC111
block
CFC_SETP
Channel block CFC_LI111
CFC_FC111
Channel block CFC_FC111
63