Siemens SIMATIC PCS 7 SMART Getting Started page 152

Configuring the operator station
9.5 Working on the OS
Procedure
If you want to visualize the process mode on an engineering station, perform the following
settings.
1. Select OS(1).
2. Select the menu command Edit > Properties.
3. The "Project Properties" dialog window opens.
4. Select the "Options" tab.
5. Select the "Allow activation on ES" check box, if not already selected by default.
6. Click "OK".
152
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA