The Current Status; Current Status Of Your Project - Siemens SIMATIC PCS 7 SMART Getting Started

Creating SFCs

7.4 The current status...

7.4 The current status...
7.4.1

Current status of your project

Completed configuration tasks
You have learnt the following when configuring SFCs:
● Worked with standard functions such as renaming and opening.
● Created a sequential control system with graphic support.
● Renamed and assigned parameters to the steps and transitions of the sequential control
system.
● Optimized the run sequence.
128
PCS 7 SMART Getting Started - Part 1 (V9.0 with APL)
Getting Started, 12/2017, A5E42181435-AA