Table of Contents
Advertisement
MPEG Player - Menus and controls
MPEG Player - Menus and controls
Menus in the Play screen
File menu
View menu
4–18
This section describes the function of each selection available in the menus. This
section is divided into the following subsections:
Menus in the Play Screen describes all of the menu commands and their
features available in the Play screen.
Toolbar Buttons describes the toolbar buttons and their functions.
The File menu contains commands for selecting a stream file and for loading and
saving a preset file. The following table describes the commands in the File menu.
Table 4-7: File menu commands (Play screen)
Command
Open
Load Preset
Save Preset
Exit
The View menu contains commands that control the display of the Toolbar and
the Status bar. The following table describes the commands available in the
View menu.
Table 4-8: View menu commands
Command
Toolbar
Status Bar
Compact Mode
MTS4000 and MTS4SAV3 Generator Applications User Manual
Description
Opens a stored stream file. When a file is selected, the MPEG
Player checks the packet size of the file. For a transport
stream the output data is in packets. If an incomplete packet
is included at the start or end point of the file, that portion
is not output.
The function uses a standard Windows Open... dialog box.
Loads the specified preset file (*.xml). When a preset file is
loaded, the current instrument settings are changed by the
file's content. Refer to Preset File for more information about
the preset file. (See page 4-57.)
Saves the current instrument settings as a preset file. Refer
to Preset File for more information about the preset file.
(See page 4-57.)
Quits the MPEG Player application. The MPEG Player
application settings are saved.
Description
Shows or hides the toolbar.
Shows or hides the status bar.
Displays the play screen at the bottom when set to ON and
the size of the play screen becomes compact.
Advertisement
Table of Contents
