Troubleshooting; Telemetry Help - Boston Scientific Vercise DBS Remote Control 3 Directions For Use Manual

Troubleshooting

Telemetry Help

Common sources of interference, such as televisions and computer monitors, can affect wireless
communication. You will continue to have access to the Remote Control menus even if the Remote
Control is outside its effective communication range. If you enter a command to change your settings
or programs while the Remote Control is outside of its effective communication range, you will have
several seconds to move the Remote Control within range of the Stimulator to send the command.
After the command is received by the Stimulator, the Remote Control will make a double-beep then
display the requested change on the screen. If the Remote Control is unable to communicate with the
Stimulator, the Telemetry Error message will appear:
To retry communication with the Stimulator – this resends the last command – select Retry
To cancel communication and return to the screen, press
The Telemetry Help tool is also available to assist you in improving communication between the
Remote Control and the Stimulator. To use the Telemetry Help tool, select Telemetry Help
following screen will be displayed:
Telemetry Error
Communication
Failed
Retry
?
Telemetry Help
Cancel Select
Test the Remote
at Di erent
Positions
Press to Exit
?
.
Vercise™ DBS Remote Control 3 Directions for Use
Troubleshooting
.
?
. The
92104389-01 21 of 27