Main Menu; Main Menu - Screen Key Set - Frick Quantum Operation Manual

S90-010 O
Page 14

MAIN MENU - SCREEN KEY SET

The Main Menu screen provides a selection of screen
keys to guide the operator through all the screens. The
following are descriptions of each screen selection and a
listing of further selections:
[Operating Status] - Shows the Operating Status
screen.
[Alarms/Shutdowns]
Shutdowns screen which shows in red text the
current Failures, and the Date, and Time of the
Failure. The following selections are available:
•
[Clear Alarms]
•
Alarms/Shutdowns History Screen
•
Freeze Display
•
Power Down Display
[Control Setup] - Shows the Control Setup menu
screen. The following items are selections:
•
Capacity Control Setpoints
•
Compressor Safeties Setpoints
•
Motor Control
•
Oil Setpoints
•
Slide Valve
reference Compressor Model Differences)
•
Setback Schedule
•
Options Setup
•
Auxiliaries 3-8 (If applicable, see Panel
Setup)
•
Auxiliary
Pressures (If applicable, see Panel Setup)
•
Pumpdown/DX Circuit Setup (If applicable,
see Panel Setup)
[Security] - Shows the current security privilege level
and if setpoints are allowed to be changed from the
keypad. Security can be changed on this screen.
®
FRICK QUANTUM™ COMPRESSOR CONTROL PANEL
- Shows the Alarms
Setpoints (If applicable,
Analog Temperatures
OPERATION

Main Menu

[Calibration] - Shows the Analog Calibration
screen. From this screen the following calibrations
can be selected:
•
Pressure Transducer Ranges and Offsets
•
Temperature Probe Types, Ranges and
Offsets
•
Calibrate Motor Current
•
Calibrate Slide Valve and Slide Stop (If
/
applicable, reference Compressor Model
Differences)
•
Calibrate
applicable, see Panel Setup)
•
Calibrate Slide Valve Position (If applicable)
•
Calibrate Auxiliary Analog (If applicable, see
Panel Setup)
•
Kilowatt Monitor Calibration and Setup (If
applicable, see Panel Setup)
[Panel Setup] - Shows the Panel Setup screen. This
screen has the following menu items for setup:
•
Change Current Time and Date
•
Pressure Units
•
Temperature Units
•
Language
•
Change Communications
•
Capacity Control Options
[About...] - Shows the About screen. This screen
shows the software version, the sales order number,
copyright notification, main board information, analog
and
board(s) information and digital board(s) information.
[Real Time] - Real Time Trending feature.
[History] – Historical Trending and data logging.
[Service Screen] - Selecting this key shows the
Service Screen that provides tools for troubleshooting
and setting up the Quantum™.
Remote Control Setpoint (If