Table of Contents
Advertisement
Mounting and options
3.3 Thermal motor protection
3.3
Thermal motor protection
Two Pt1000 temperature sensors in the stator winding (one of which is reserve) monitor the
motor temperature.
Table 3- 1
Type
Resistance when cold (20 °C)
Resistance when hot (100 °C)
Connection
Response temperature
The resistance change is proportional to the winding temperature change. The temperature
characteristic is taken into account in the closed-loop control.
The following diagram shows the resistance characteristic as a function of the temperature
for Pt1000 temperature sensors.
Figure 3-1
The winding temperature is evaluated in the converter. When a fault occurs, an appropriate
message is output at the converter. When the motor temperature increases, a message
"Alarm motor overtemperature" is output. The message can be evaluated externally.
If this message is ignored, the converter shuts down with the appropriate fault message after
a preset time period or when the motor limiting temperature or the shutdown temperature is
exceeded.
The integrated temperature sensor protects the synchronous motors only to a certain extent
against overloads:
36
Features and technical data
Pt1000 characteristic
Pt1000
Approx. 1090 Ω
Approx. 1390 Ω
Via signal cable
Prewarning < 150 °C
Alarm/trip at max. 170 °C ±5 °C
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA
Advertisement
Table of Contents
