Transportation And Storage; Transport - Siemens SIMOTICS S-1FK7 DYA Generation 2 Operating Instructions Manual

Preparing for use

4.2 Transportation and storage

4.2 Transportation and storage
4.2.1

Transport

Danger of the motor down due to incorrect transport and/or lifting
Due to incorrect transport and/or lifting, the motor can fall and cause death, severe injury
and/or damage to property.
• Lifting devices, ground conveyors, and load suspension equipment must comply with
• The maximum capacity of the lifting equipment and the load suspension device must
• Do not attach any additional loads to the lifting equipment.
• To hoist the motor, use suitable cable-guidance or spreading equipment, particularly if
• The motor must not be lifted or transported by means of the power connector or signal
• Do not stand in the slewing range of hoisting gear or under suspended loads.
Note
Comply with the local national regulations for the transportation of motors.
● Use suitable load suspension devices when transporting and installing the motor.
● Transport and store the servo geared motors in the original packaging.
● Transport the motor carefully.
Lifting and transporting the motor using slings
You can lift and transport the motor using slings.
Figure 4-1
44
WARNING
requirements.
correspond to the weight of the motor (see the rating plate).
the motor is equipped with built-on assemblies.
connector.
Transporting with slings
S-1FK7 DYA G2 synchronous motors with planetary gearbox
Operating Instructions, 05/2018, A5E44881183B AA