Manufacturer Declaration - Kollmorgen Seidel 6SM56 Series Technical Description

Kollmorgen

Manufacturer declaration

According to the EG-Machine-guideline 89/392/EWG, appendix II B
We, the company
Kollmorgen Seidel GmbH & Co. KG
Wacholderstraße 40-42
40489 Düsseldorf
declare, that the product
Motor series 6SM
(types 6SM45, 6SM56, 6SM71, 6SM100)
is intended exclusively, in its standard version, for installation in another machine and that its
commissioning is forbidden until it has been established that the machine into which this product is
to be installed conforms to the provisions of the EC Directive in its version 89/392/EEC.
We confirm that the above-mentioned product conforms to the following standards:
73/23/EWG
VDE 0530 / DIN 57530
DIN 42950
DIN 748
DIN 42955
DIN ISO 2373
Issued by:
This Declaration does not contain any assurance of properties. The notes on safety and protection
in the operating instructions must always be observed.
Motor series 6SM45..100
05.2000
Low voltage directive
Provisions for rotating machinery
Design
Cylindrical shaft ends
True running, coaxiality and concentricity
Vibration class
Management
Lawrence D. Kingsley
Manufacturer Declaration
7