Options; Nameplate - Kollmorgen Seidel 6SM56 Series Technical Description

Kollmorgen
I.7

Options

-09-
-G-
-J-
-65-
-67-
-92-
-BV- The rated torque in the series 6SM56..100 can be increased by fitting a separately
-K-
-2K- Special varnish with 2-component enamel.
-426- Encoder adaptor for ROD426/ROQ425 with coupling and eccentric washers.
I.8

Nameplate

The nameplate depicted below is attached to the side of the servomotor. The information
described below is printed in the individual fields.
Servomotor-Type
and options
Protection class
Motor series 6SM45..100
Special flanges and shafts are possible, we invite inquiries.
Built-in holding brake.
Radial shaft-sealing rings:
A radial shaft-sealing ring can be supplied at extra charge to seal against oil mist
and oil spray. This increases the protection rating of the shaft bushing to IP65. The
sealing ring is not suitable for dry running. When a holding brake is built in, the
motor length increases by option -J- for 10mm.
Low tolerance for flange and shaft dimensions and increased concentricity and
angularity according to DIN 42955
Shaft end precisely ground for oil tight seal,
tolerance field k5
Tropical insulation
driven fan. The fan has the intake on the B-side, cools the motor surface and
exhausts to the A-side. For motors of the 6SM100 series, the fan is also obtainable
with a shortened bonnet.The electrical connection of the fan is carried out via a
connector. The mating connector is included in the delivery package of the option.
The protection rating of the motor with a fan is IP54.
Mounting flange for Stöber bevel gear
Standstill torque
Insulation material
class
05.2000
Standstill current
Rated speed
General
Rated power
Serial number
Operating mode
13