Maximum Permissible Read Angles Between Bcl 508 I And Barcode; Attaching Laser Warning Sign; Cleaning; Figure 6.7: Reading Angle For The Line Scanner - Leuze electronic BCL508i Technical Description And User Manual

Installation and mounting
6.3.6 Maximum permissible read angles between BCL 508
The optimum alignment of the BCL 508
bars almost at a right angle (90°). All read angles that are possible between the scan line
and barcode must be taken account (figure 6.7).
Figure 6.7:
α
Tilt - max. 45°
β
Pitch - max. 45°
γ
Skew - max. 45°
In order to avoid total reflection, the skew
6.4

Attaching laser warning sign

Attention Laser!
Follow the safety notices in chapter 2.
It is important that you attach the sticky labels supplied to the device (laser warning signs
and laser emission symbol)! If the signs would be covered due to the installation situation
of the BCL 508i, attach them instead in the immediate vicinity of the BCL
way that it is not necessary to look into the laser beam when reading the notices!
6.5

Cleaning

Clean the glass window of the BCL
packaging remains, e.g. carton fibres or Styrofoam balls. In doing so, avoid leaving fin-
gerprints on the front cover of the BCL 508i.
Attention!
Do not use aggressive cleaning agents such as thinner or acetone for cleaning the device.
70
Reading angle for the line scanner
i
is accomplished when the scan line scans the code
γ
should be greater than 10°
508i with a soft cloth after mounting. Remove all
BCL 508 i
i and barcode
508i in such a
Leuze electronic